Thursday, 4 February 2016

Welding hazards

What are hazards associated with welding? What hazardous materials are used in welding? Is welding a dangerous job? What is the best protection against welding hazards?


To help keep welders safe, organizations such as the American Conference of Governmental Industrial Hygienists (ACGIH) and the Occupational Safety and Health Administration (OSHA) offer safety guidelines to help control, minimize or to help employers and workers avoid welding hazards.

Health hazards from welding, cutting, and brazing operations include exposures to metal fumes and to ultraviolet (UV) radiation. Provides information about potential hazards and possible solutions associated with these welding , cutting and brazing operations. Health hazards associated with welding, cutting, and brazing operations include exposures to metal fumes and to ultraviolet (UV) radiation. By its nature, welding produces fumes and noise , gives off radiation, involves electricity or gases, and has the potential for burns, shock, fire, and explosions.


Some hazards are common to both electric arc and oxygen-fuel gas welding. The intense heat of welding and sparks can cause burns. Many of the substances in the smoke can be extremely toxic.

Harmful welding fumes , loud noises, intense heat, glaring light—these may be an unwelcome part of your work day. The extent of the problem depends upon the type of welding you do, and the precautions that you take. The content of the welding rods, coatings, filler metals, and base materials also greatly impacts your health.


Arc welding is a safe occupation when sufficient measures are taken to protect the welder from potential hazards. When these measures are overlooke welders can encounter such dangers as electric shock , overexposure to fumes and gases, arc radiation , and fire and explosion. The free PDF documents below provide clear help in addressing common safety and health concerns. For more detailed information, refer to the free ANSI Z49.


Fire and Explosion Prevention. Also, hand gloves will protect their hands from burning because welding is involved with a lot of heat. This protective clothes will keep them safe from unwanted burning from all sorts of debris.


Your biggest on–the–job risk is exposure to. When the welding rod or base metal is iron or mild steel,. Therefore, it’s important that you are aware of the risks and hazards welding poses, and understand what precautions you can take to protect yourself.


Proper safety procedures and protective gear can help you. The welding arc creates extreme temperatures, and may pose a significant fire and explosions hazard if safe practices are not followed. While the welding arc may reach temperatures of 10degrees Fahrenheit, the real danger is not from the arc itself, but rather the intense near the arc and the heat, sparks and spatter created by the arc.

Fumes and smoke emitted during welding pose a health hazard. When welding in confined spaces, toxic fumes may accumulate, or shielding gasses may replace breathable air. Use an exhaust hood to remove fumes from the area and ensure enough clean breathing air is available.


Welding on some plated or painted metals may be.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts