Water mist system design

Water mist systems design and installation is one of the main aim of the International Water Mist Association (IWMA). The company is a panel of dedicated professionals and companies having an interest in fire fighting systems using water mist as an extinguishing agent, released a Position Paper on water mist systems design and installation. Only one water mist test considered satisfactory. Low pressure water mist on a 2. A water mist system is a fire protection system which uses very fine water sprays (i.e. water mist ).

The small water droplets allow the water mist to control, suppress or extinguish fires by: cooling both the flame and surrounding gases by evaporation. Thus, this system design utilized open (deluge) type water mist nozzles. Due to the design of the system and the water mist nozzle use the high pressure configuration of the system was capable of holding 9mL of antifreeze solution, while the low pressure configuration held 7mL. The water mist system installer shall provide and install all monitoring, supervisory and alarm devices that attach to the MAU, control valves, or water mist piping system.

The contractor responsible for work shall connect the devices to the fire alarm system. We use high quality, flexible, stainless-steel braided piping to make the installation quick and as smooth as possible. The iMist alternative fire sprinkler system is manufactured and designed in our factory.

The triple piston design increases pump life, is super quiet and consumes less energy.

For total flooding systems , controls must be readily accessible outside of the protected space and in a space that is accessible in the event of a fire in the protected space. For local application systems , controls shall be provided in easily accessible locations inside and outside the protected space. Innovative engineering and an efficient design allow you to use less water to help protect your facility from fire hazards. AquaMist systems work by producing a fine water mist, which is designed to cool the surrounding area—limiting the spread of fire—while helping to control active fires and preventing re-ignition.

Download Manual Water Mist Design Calculate Application. AquaMist FOG Machinery Spaces system design for total flooding systems according FM. WATER MIST DESIGN GUIDE. In the event of a fire, the Fike Micromist Water Mist Extinguishing System will provide protection for highly relied upon equipment, and will also provide a safe working environment.

This Design Guide provides a step by step design process of a Fike Micromist Water Mist Extinguishing System. So here is a great way to help cool down those summer days you want to spend outside with friends. Measure the length of misting line and the distance from the pump to the misting line. Be sure to include changes in elevations. SELECT YOUR NOZZLE TYPE.

Your nozzles are created for different types of areas. For example, we have nozzles that are designed for humid vs. In fact, the Micromist system releases 1times less water than traditional sprinkler systems, yet effectively extinguishes the fire.

That translates into less run-off, less damage and easy clean-up.

Shop By Misting Systems. Water mist fire protection system manufacturers have designed their systems to release a very fine water spray or mist to cool the flame and displace oxygen by evaporation. In most cases it will effectively reduce the threat of the fire however it is not usually considered a fire extinguishing system for all types of fire hazards. A system OM manual is included as part of the approval.

Nozzles and necessary components are li sted in the manual.