Monday 29 January 2018

Quick closing valve

What is quick release valve? This can be done by careful selection of valve trim, i. Self closing valves are often closed by means of a counter weight or spring. ARMATUREN-WOLFF quick-closing valves and quick-closing valve systems are worldwide in service on board of ships as well as in land-based industries. With its long experience in the development and production of these products, ARMATUREN-WOLFF counts among the leading manufacturers around the world.


Closing valve by hand wheel (11) The valve can be closed by the hand wheel (11), when required.

Turn the hand wheel (11) in clockwise direction. The setting nut (9) will then be fully pushed up against the top of the bonnet (8), which holds the disc (3) in shut off position. Butterfly Valves , Gate Valves , Globe Valves and other valves types with having modern equipment and facilities, Dikkan provide latest customer needs in the market. During normal operating conditions, these quick closing valves are actuated by the conventional hand wheel method. When an emergency occurs, a lever actuates the “armed” release mechanism, thus the valve is closed or opened without manually turning the hand wheel.


Normally installed in a horizontal or down-flow position, Greenwood Valves remain in an open mode. The fusible link assembly holds the disc up out of the material flow until an emergency arises. Quick Closing Valves which can be controlled by mechanical, hydraulic or pneumatic transmission.

Suitable for marine service, providing a quick shut-off in emergency situations from outside the engine room. Mainly used in pipeline systems with combustible liquids. Lloyds, BV, DNV, Germanischer Lloyds inspection can be arranged. If I considered all ball valves to be quick closing , I would be providing water hammer arrestors on all my branches that have a ball valve for a shut off valve. To me a quick closing valve would be a solenoid valve or the older piston type flush valves.


A diaphragm flush valve opens and closes a bit slower than that. A quick closing valve can be controlled by pneumatic, hydraulic, or mechanical transmission. Suitable for a variety of applications, a quick closing valve serves the purpose of a very important safety function, especially in emergency situations where a product may need to be suddenly shut off to stop the flow. The most commonly encountered causes are the action of quick - closing valves, back surge, pump start up and pump shut down. Hydraulic surge: a problem that can have disastrous consequences both for pumps and processing plant is hydraulic surge or water hammer.


Regular check valves closes under the effect of its disc weight, the force of an spring or by the back-flow load. For Example, piston type flushometer valves close quickly enough to cause hydraulic shock but some new designs of flushometer valves are slow closing , thus eliminating the need for hammer arrestors. The low height also allows the usage in narrow spaces. They are available in nodular cast iron, cast steel and bronze.


Quick closing valves Our sos valves are designed to ensure a safe and simple operation. Quick - closing valves are examined and tested when installed and then periodically when the tank is not in use, to ensure that the mechanism functions correctly. Wires are sometimes found to be slack or hydraulic systems empty.


And whether quick closing valve is normal temperature, medium temperature, or low temperature.

There are 4quick closing valve suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Hong Kong, and Greece, which supply , , and of quick closing valve respectively.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts