Tuesday, 12 February 2019

Gate valve function

How does a gate valve work? Can you use gate valve as a regulation valve? What is its function of gate valve? A: A gate valve is designed to turn the flow of liquid through pipes on and off. It is generally used on a valve that is not used frequently.


It is also helpful in controlling the flow of pressure through the pipes and valves.

Also known as a sluice valve , it controls flow by moving a round or rectangular wedge in and out of the liquid path. In order to increase tightness of the seal some gate valves are provided with twin discs which can be pressed against the seat with the help of a spring when closed. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved.


A gate valve is a multiturn valve meaning that the operation of the valve is done by means of a threaded stem. As the valve has to turn multiple times to go from open to closed position, the slow operation also prevents water hammer effects. Gate valves can be used for a vast number of fluids. When the valve is fully open, gate valves are full bore, meaning there is nothing to obstruct the flow because the gate and pipeline diameter have the same opening.


This bore diameter also determines the valve size.

Valve serve a various function within the piping system. Stopping and starting a fluid flow. Depending on whether a valve is open or close it let pass the process fluid or halt the fluid.


Throttling the fluid flow. Some of the valves let you throttle the fluid depending open of total opening. Parallel gate valves are used in low pressure drops and low pressures, and where tight shutoff is not an important prerequisite. Wedge-shaped gate valves use two inclined seats and a slightly mismatched inclined gate , allowing for tight shut-off. The gate valve is the most frequently used valve in piping systems.


It is a general service valve that is used primarily for on-off, non-throttling applications. A partially opened gate valve will hasten erosion caused by the commodity within the pipe and will ruin the valve seat in a short period of time. Globe valves are to the contrary can be modulating and can reduce the flow with accuracy. What are the differences between a gate valve and.


Find Gate Valves by Specification or See our Directory of Suppliers. A gate valve functions by lifting a rectangular or circular gate out of the path of the fluid. They are best used in systems which require infrequent use of the valve. The valves are designed for full-area flow to minimize the pressure drop and allow the passage of a pipe-cleaning pig.


The difference between a gate valve and a sluice valve is that a gate valve is used for closed pipelines on the other hand sluice valve is used for open systems such as dams. There will be one gate or wedge in gate valve and it will control the fluid flow.

Knife gate valves were originally designed for the pulp and paper industry. Stringy pulp would get stuck between the wedge and the seat of a normal gate valve and prevent flow shut-off. Same gate valve can have flow in both directions.


While globe valve has flow direction usually indicated on it and is used in compliance with that. Valve Opening and closing geometry of disk and seat is also a difference between globe and gate valve. A globe valve , different from ball valve , is a type of valve used for regulating flow in a pipeline, consisting of a movable plug or disc element and a stationary ring seat in a generally spherical body.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts