Butterfly valve types

What are the different types of butterfly valves? When to use a butterfly valve or ball valve? The wafer body is placed between pipe flanges,. The lug body has protruding lugs in the periphery.

In this types , the body has flanged that match with pipe flange dimension.

Types Concentric butterfly valves – this type of valve has a resilient rubber seat with a metal disc. Doubly-eccentric butterfly valves (high-performance butterfly valves or double-offset butterfly valves ). Triply-eccentric butterfly valves (triple-offset butterfly valves ) – the seats are either. Buttwelded end connection also available upon request. A butterfly valve is used to shut off or modulate the flow of a fluid (isolation and regulation). API 6Centric butterfly valves (soft seated) are preferred to gate and ball valves for low-pressure and non-critical applications as they are cheaper, lighter and easier to install.

The disc sits perpendicular to flow of when the valve is closed and parallel to flow when the valve is open.

Check valve relies on internal pressure, instead of outside action, for opening and closing. Also known as non-return valve , prevention of backflow is the main function of a check valve. A different installation procedure is used for each one.

Wafer style is the more common of the two and is less expensive than. They require only a quarter turn from closed to full-open position. A typical flanged butterfly valve is illustrated in Fig.

Butterfly Valve Types Thermoplastic Butterfly Valves. BUTTERFLY VALVE DESIGN CONCENTRIC BUTTERFLY VALVE (CENTRIC) The concentric butterfly valve is used in water. They are usually manufactured in flange wafer, and lug,.

DOUBLE ECCENTRIC BUTTERFLY VALVE. Double eccentric butterfly valves find large application in. TRIPLE ECCENTRIC BUTTERFLY VALVE. Triple offset butterfly valves are built with high-grade. Another important feature is that these valves can be equipped with a gearbox-like mechanism.

In the setup, the hand wheel from the gears is connected to the stem, making the valve easy to operate but at low speeds and for larger valves.

With that in min let’s look at ways to install different types of butterfly valves. Situated in the center of pipes, butterfly valves feature a disk-shaped closing mechanism to help provide quick shutoff through an actuator visible on the outside of the valve. Choose a resilient butterfly valve with rubber seating parts for low-pressure applications. Installation requires only inserting the valve body between flanges, centering it, and tightening the bolts to specified torque.

The eccentric type can be single, double, or triple-offset type. Emerson is where technology and engineering come together to create solutions for the benefit of our customers, driven without compromise for a world in action. The common body types are lug style and wafer style, and flanged ends are used in some large diameter designs. The economic and short wafer body is clamped between two pipeline flanges. If the downstream side of the butterfly valve acts also as a point of disconnection while the upstram side is under pressure,.

Ideal for precision throttling and on-off applications, especially in lighter-weight piping systems, the Flowserve family of butterfly valves is often specified for its versatility. Outstanding throttling accuracy for process control is achieved through low-friction, erosion resistant sealing surfaces with very low operating. EPDM is an abbreviation of a compound called Ethylene Propylene Diene Monomer. It is also commonly called EPT, Nordel, and EPR.

Lowest Prices - Industrial Valve s. Water Valve s - Low Prices, Buy Now.