Friday, 7 April 2017

Insulation pins

Mini-Cupped Weld Pins : These pins actually weld to the sheetmetal duct and the head of the pin holds the insulation in place. A pin welder machine is required for these pins. GEMCO representative for assistance.


For use with a Capacity Discharge Weld Gun. All pins come insulated to avoid sparking when used on FSK facing.

The x base is fabricated out of metal with the pin attached for impaling and installing various acoustic insulation materials. These insulation pins have a perforated base which allows adhesive to grip the hanger and adhere it to nearly any surface. Lock washers (sold separately) are used to hold the insulation onto the pin or the pin head can be curled with pliers to hold the insulation in place.


Dome Caps can also be used instead of the lock washers. BOSS 1MULTI-SEAL INSULATION PIN ADHESIVE. About of these are other heat insulation materials, are nails, and are other fasteners.


A wide variety of insulation pin options are available to you, such as cap nail, anchor bolt, and concrete nail.

What is stick pin insulation? Attach these hanger studs to a flat surface, then press your insulation sheets onto the spikes and secure with a washer (sold separately). Plain-back studs install with adhesive (sold separately) to uncoated metal, concrete, and masonry.


Apply adhesive at temperatures above 40° F. Adhesive-back studs are for use on indoor metal surfaces. Only left in stock - order soon. Quilting pin is a cup head pin made by stainless steel, we usually use 304SS as the material, Quilting pins are.


HVAC - China insulation pins manufacturers and suppliers, with bulk high quality products in stock. Welcome to wholesale insulation pins made in China from our factory. These anchors are used for attaching insulation to a surface and are featured below. Insulation pins – mechanical fixing of insulation Rockwool.


Install Pins are used to mechanically fix and install insulation material that can be pierced by metal spindles. These pins are used for attaching insulation to a surface and are featured below. The AGM line of insulation fasteners is the industry’s benchmark for quality and ease of use.


A common way to secure retrofit insulation to the walls is using stick pins. The pins then penetrate the fiberglass and facing and a washer is placed over the insulation to secure it.

The pointed tips are then cut off with a wire cutter. Target Pins are a patented insulation fastener with an aerodynamic, embossed washer and a recessed nail hea to improve the quilting contour of the secured duct. Find quality insulation accessories online or in store. Plating Galvanized coating is standard. The spotter pin is welded to the sheet metal and the insulation is impaled over the nail.


It is held in place with the addition of a galvanized steel washer. SPOTTER PIN (PN) GOLD SEAL PINS SELF SEALING PIN After the pins are welded to the duct, (pin per sq. ft.), press the insulation onto the pins. It is the only fastener available in galvanize aluminum and stainless steel.


All Flipstix are sold with a galvanized steel or aluminum washer. Available in multiple lengths. The insulation supports are cut from carbon steel, spring wire for optimum flexibility and strength.


Mitered tips dig into the woo securing itself and insulation when installed between joists with the insulation wires.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts